Metal button mould making and adjustment
Metal button mold making A. The die face should be matched with the appearance of the product. When the product has obvious rough wheat head, “overmold†should be used to ensure that the product does not deform after hitting. B. The “volume position†of the moulding should ensure that the flute mouthpiece, such as the face flute product, can be effectively bent and “blossomed†as much as possible. C, the size of the mold should match the size of the product, such as product diameter, height, etc., followed by different products to determine the mold material, such as steel mold, plastic mold, spring mold, etc., again, mold The size of the body and the handle should be matched with the size of the machine body used and its hole position. It is strictly forbidden to use a method of winding foreign objects on the mold handle to install the mold. Modular adjustment of metal buttons A. After installing a new type of machine, test the blanks first, then adjust the distance between the upper and lower molds to the appropriate position according to the thickness of the fabric. At the same time, confirm that the upper and lower axes of the machine are not significantly misaligned (guaranteed coaxiality). B. After the product is put on the fabric, the strength value of the button should reach the standard. If there is no testing instrument, in principle, the gap between the new fabric and the fabric will not enter into the nail plug, and the tension will not fall off. Want to learn more about buttons: accessible For more details, please pay attention to WeChat public number: Textile Organza,Organza Fabric,Organza Silk,Printed Organza Fabric JIANGSU ZJA NEW MATERIAL CO., LTD , https://www.zjafiber.com